Optimization of sucrose ethanol fermentation for K,Na, Ca,and cu metal contents

The effect of the trace metals Cu, K, Na, and Ca, separately or in mixture, on fermentation time, ethanol production rate, and cell growth in the fermentation of synthetic media containing sucrose is discussed. The results are related to the range of contents found in raw materials, molasses and raisins, in order to determine their optimum concentrations for alcohol production.     

The effect of ph and gas composition on the bubble fractionation of proteins

Studies were conducted to establish the effect of the variation of environmental factors on the separation occurring in protein systems, resulting from bubble fractionation in a bioreactor. The measure of separation was selected to be the separation ratio. This is defined to be the ratio of either the top or the middle position concentration in the vessel to the bottom concentration of the vessel. Invertase and α-amylase were the two “model” enzymes considered. It was observed that, under certain conditions, i.e., a combination of the nature of the sparging gas and the medium pH, varying degrees of protein separation were achieved. The pH of the system dramatically influenced the separation. It was found that the best separation occurred at a certain pH, assumed to be at or close to thepI of the protein in question. Furthermore, it was observed that systems sparged with CO₂ exhibited greater separation than systems sparged with air. In fact, in the case of invertase, almost threefold separation was observed at the top port when the solution was sparged with CO₂.     

Enzymatic synthesis of neopentylpolyol esters in organic media

Utilization of lipases for synthesis of esters of hydrophilic polyols has been investigated. The choice of a suitable solvent is crucial in this type of reaction. An interesting case is fatty acid esters from neopentylpolyols, such as trimethylolpropane, which are of great interest as high temperature lubricants. Enzymatic synthesis of trimethylolpropane tricaprylate was studied as an alternative to chemical manufacturing. Triester production occurred only if the water produced by esterification was continuously removed from the medium. In these condition, kinetics of appearance and transformation of mono-, di- and triesters were determined in order to define optimal conditions.     

Photobioelectronic studies with thylakoid membranes

The research described in this paper presents a method for chemically modifying the surface of plant photosynthetic membranes in such a way that electrical contact can be made. Colloidal platinum was prepared, precipitated directly onto thylakoid membranes from aqueous solution, and entrapped on fiberglass filter paper. This composition of matter was capable of sustained simultaneous photoevolution of hydrogen and oxygen when irradiated at any wavelength (400–700 nm) in the chlorophyll absorption spectrum. Experimental data support the interpretation that part of the platinum metal catalyst is precipitated adjacent to the photosystem-I reduction site of photosynthesis and that electron transfer occurs across the interface between photosystem I and the catalyst. When contacted with metal electrodes, the thylakoid-platinum combination was capable of generating a sustained flow of current through an external load resistor. Procedures for preparing this material and experimental data on its catalytic and electronic properties are presented. Also presented is an analysis of the flow of photocurrent in terms of the interfacial electron transfer reactions that occur at the interfaces of the components of the assembly.     

Interactions of thiophenes and acidophilic,thermophilic bacteria

The growth and oxygen consumption of a variety of thermophilic, acidophilic bacteria in the presence of thiophene-2-carboxylate (T2C) and dibenzothiophene (DBT) have been determined. T2C was extremely toxic to the acidophiles in comparison with neutrophiles, but appeared to be degraded by a heterotrophicSulfolobus- like thermophile. DBT proved to be unstable at high temperatures, even in the absence of bacteria, and was not a substrate for the thermophiles.     

Phenomenological and neural-network modeling of cephalosporin C production bioprocess

Cephalosporin C production process withCephalosporium acremonium ATCC 48272 in synthetic medium was investigated and the experimental results allowed the development of a mathematical model describing the process behavior. The model was able to explain fairly well the diauxic phenomenon, higher growth rate during the glucose-consumption phase, and the production occurring only in the sucrose-consumption phase. Moreover, the process was simulated utilizing the neural-networks technique. Two feed-forward neural-networks with one hidden layer were employed. Both models, phenomenological and neural-networks based, satisfactorily describe the bioprocess. The difficulties in determining kinetic parameters are avoided when neural networks are utilized.     

Growth kinetics and phenolics production inGlycine Max cell suspension cultures

Glycine max was used as a model plant cell suspension culture to establish relationships among growth kinetics, phenolics production, elicitor action, and peroxidase activity. Timing of elictor addition through monitoring of peroxidase provided an excellent means of optimizing yields of phenolics and reduced the time span during which phenolics were formed, negating the need for a secondary production medium. We have also determined that calcium and other cellular effectors like polyamines and organic osmolytes, when used in conjunction with elicitors, enhance phenolics production. Calcium directly enhanced elicitation, whereas polyamines and other osmolytes such as glycerol and proline extended cell viability. The study also demonstrated potential for enhancing secondary metabolite production by a combination of elicitation, cell viability stabilizers, and by addition of nutrients at the time of elicitation.     

Development of a novel laboratory scale high solids reactor for anaerobic digestion of processed municipal solid wastes for the production of methane

Economic evaluations of the capital costs for anaerobic digestion systems for gas production show that the reactor is a significant cost component. The successful application of high solids digestion of processed MSW (e.g., greater than 10% solids within the digester) would allow a decrease in reactor volume with maintenance of relatively high gas production rates. However, high solids slurries do not mix well in conventional stirred tank reactors. A horizontal shaft, hydraulically driven reactor was designed and fabricated to test the anaerobic digestion of high solids concentrations. Digester performance was evaluated as a function of experimental parameters such as nutrient requirements, feeding rates, pH control, and agitator design/ rotation speed; horsepower of mixing was also evaluated for the reactor. Several startup protocols were examined to obtain a biologically stable anaerobic fermentation at high solids levels.     

Purification and characterization of lamb pregastric lipase

Lamb pregastric lipase was purified from a commercial source using delipidation, solubilization with KSCN, acid-precipitation, pepsin-digestion, affinity chromatography with agarose-Cibacron Blue F3GA, gel filtration, and elution from a native 10% (w/v) polyacrylamide gel. The enzyme had a single subunit of 68,000 Da with maximum esterase activity when measured at pH 6.0 and 30 degrees C. The enzyme preferentially hydrolyzed short- and medium-chain (C4, C6, and C8) synthetic esters and short-chain (C4 and C6) monoacid triglycerides. The NH2-terminal sequence demonstrated high homology with gastric and lingual lipases.     

Kinetics of thermochemical pretreatment of lignocellulosic materials

The results of an experimental study of the acid hydrolysis of hardwood are presented in the form of values for the three parameters, activation energy, power on the acid concentration, and pre-exponen-tial factor, of the first order kinetic constants for each of the following reaction participants: xylan remaining, glucan remaining, xylose formed, and xylose decomposed. These are used as a base for a quantitative theory to predict the temperature, time, and acid concentrations needed for effective pretreatment of the substrate for subsequent enzymatic hydrolysis of the glucan. This theory is based on the assumption that successful pretreatment requires >90% removal of the xylan, <10% removal of the glucan, and >80% xylose yield. This theory is compared with selected published data.